2.2KW (3HP) VFD & MILLING SPINDLE
2.2KW (3HP) VFD & MILLING SPINDLE
2.2KW (3HP) VFD & MILLING SPINDLE
  • Load image into Gallery viewer, 2.2KW (3HP) VFD & MILLING SPINDLE
  • Load image into Gallery viewer, 2.2KW (3HP) VFD & MILLING SPINDLE
  • Load image into Gallery viewer, 2.2KW (3HP) VFD & MILLING SPINDLE

2.2KW (3HP) VFD & MILLING SPINDLE

Regular price
$499.95
Sale price
$499.95
Regular price
Sold out
Unit price
per 

2.2KW (3HP) VFD and 2200W (3HP) AIR COOLING CNC MILLING SPINDLE

Spindle Specs VFD Specs

2.2KW AIR-COOLING HIGH SPEED HIGH PRECISION SPINDLE

NUMERICAL ENGRAVING/GRINDING/MILLING

FOUR BEARING

OD=80 mm

Length =215 mm

Input Voltage: 220V Single Phase or 3 Phase

Output: U,V, W, 1 to U, 2 to V, 3 to W

Speed: 8000-24000 R/min

Power: 2200 W (3HP),

Frequency: 400 Hz

Air Cooling,

ER20 collet chuck.

Grease Lubrication,

Run-out off: less than 0.005mm

1 to U, 2 to V, 3 to W

weight: 12 lbs

Input Power 330~440Vfor 380V power;170~240for 220V power
5-Digits Display &
Status Indicator
Lamp
Displaying frequency, current, revolution, voltage, counter, temperature,
forward or reserve running, and fault, etc.
Communication
Control
RS-485
Operation
Temperature
-10~40℃
Humidity 0-95% Relative Humidity(without dew)
Vibration Below 0.5G
Range 0.10~400.00Hz
Accuracy Digital:0.01%(-10~40℃), Analog:0.1% (25±10℃)
Setting
Resolution Digital:0.01Hz, Analog:1‰ of Max. Operating Frequency
Output
Resolution
0.01Hz
Operator Setting
Method Press directly ← ∧ ∨ to set.
Analog Setting
Method External Voltage 0-5V,0-10V,4-20mA,0-20mA.
Frequency Control
Other Functions Frequency lower limit, starting frequency, stopping frequency, three skip
frequencies can be respectively set.
l
C
Ramp Control Select-able 4-speed steps ramp-up and -down time (0.1-6500s).

Note: These are sold as product only! They will need to be wired to the controller and A/C power.