2.2KW (3HP) VFD and 2200W (3HP) AIR COOLING CNC MILLING SPINDLE
| Spindle Specs | VFD Specs |
|
2.2KW AIR-COOLING HIGH SPEED HIGH PRECISION SPINDLE NUMERICAL ENGRAVING/GRINDING/MILLING FOUR BEARING OD=80 mm Length =215 mm Input Voltage: 220V Single Phase or 3 Phase Output: U,V, W, 1 to U, 2 to V, 3 to W Speed: 8000-24000 R/min Power: 2200 W (3HP), Frequency: 400 Hz Air Cooling, ER20 collet chuck. Grease Lubrication, Run-out off: less than 0.005mm 1 to U, 2 to V, 3 to W weight: 12 lbs
|
Input Power 330~440Vfor 380V power；170~240for 220V power 5-Digits Display & Status Indicator Lamp Displaying frequency, current, revolution, voltage, counter, temperature, forward or reserve running, and fault, etc. Communication Control RS-485 Operation Temperature -10~40℃ Humidity 0-95% Relative Humidity（without dew） Vibration Below 0.5G Range 0.10~400.00Hz Accuracy Digital：0.01%（-10~40℃）, Analog：0.1% （25±10℃） Setting Resolution Digital：0.01Hz, Analog：1‰ of Max. Operating Frequency Output Resolution 0.01Hz Operator Setting Method Press directly ← ∧ ∨ to set. Analog Setting Method External Voltage 0-5V，0-10V，4-20mA，0-20mA. Frequency Control Other Functions Frequency lower limit, starting frequency, stopping frequency, three skip frequencies can be respectively set. l C Ramp Control Select-able 4-speed steps ramp-up and -down time (0.1-6500s). |
Note: These are sold as product only! They will need to be wired to the controller and A/C power.